Login

Login

Welcome to ZEVENET 6.2! Access to the ZEVENET web GUI If you've successfully installed or deployed ZEVENET 6.2, you will...
  • 0
  • 154

Dashboard

Dashboard | ZEVENET Enterprise 6.2 The dashboard shows an up-to-date status of the entire load balance appliance i.e. CPU and...
  • 0
  • 825

Dashboard | News

Get the latest Updates, News and Press releases from ZEVENET. Share on:
  • 0
  • 651

LSLB | Farms | Create Farm

Under this section, you will be able to create LSLB farms. These farms can be configured in two profiles: HTTP...
  • 0
  • 750

LSLB | Farms | Update

Update HTTP and L4xNAT profiles This section allows configuring different options of LSLB farms. Each farm profile includes various parameters...
  • 0
  • 195

LSLB | Stats

LSLB farms stats Find all LSLB farm statistics in this section. The stats include both established and pending connections for...
  • 0
  • 728

LSLB | Stats | Graphs

Farms Graph Stats This section shows the monitoring graph history of established and pending connections of current farms in four...
  • 0
  • 745

LSLB | Stats | Backends

This section shows two tables, a table with both established and pending connections per backend (Backends Table), and another table...
  • 0
  • 843

LSLB | SSL Certificates

SSL Certificates List This section lists all certificates installed on the appliance and are ready for use by LSLB farms....
  • 0
  • 751

LSLB | SSL Certificates | Upload

In this section, you'll upload SSL Certificates for the LSLB farm using the Upload Certificate action. When you click the...
  • 0
  • 778

LSLB | SSL Certificates | Info

This section is about viewing information on the SSL Certificates. When you click on any name under the Common Name...
  • 0
  • 591

LSLB | Let’s Encrypt

Let's Encrypt certificates list In this section, you'll learn more about ZEVENET Application Delivery Controller. This application has been integrated...
  • 0
  • 207

GSLB | Farms

GSLB Farms Overview The Global Service Load Balancing (GSLB), allows load balancing at a DNS level. At this level, requests...
  • 0
  • 170

GSLB | Farms | Create

In this section, you will be able to create GSLB farms. Create Farm GSLB After selecting the Create Farm action...
  • 0
  • 134

GSLB | Farms | Update

This section shows all the settings available for the current GSLB farm categorized into four tabs: Global, Services, Zones, and...
  • 0
  • 158

GSLB | Stats

GSLB Farm Stats Find all GSLB farm statistics in this section. The stats include both established and pending connections for...
  • 0
  • 127

GSLB | Stats | Graphs

GSLB Farm Stats Graphs This section shows the monitoring graphs and history of both established and pending connections of the...
  • 0
  • 130

GSLB | Stats | Backends

This section shows a detailed status of the GSLB farm Backend Stats, Client requests, Server requests, and Extended Stats. GSLB...
  • 0
  • 149

DSLB | Farms

The Datalink Service Load Balancing(DSLB), also known as Uplinks Load Balancing, allows the of creation of highly available and scalable...
  • 0
  • 150

DSLB | Farms | Create

Create Farm DSLB To create a DSLB farm, go to the DSLB >> Farms section, and click the Create Farm...
  • 0
  • 108

DSLB | Farms | Update

Global Settings for DSLB Farms These are the global settings you will use to configure the DSLB farm. Find a...
  • 0
  • 141

IPDS | Settings

This section describes how to install or schedule updates for the IPDS package for Intrusion Prevention and Detection Service. IPDS...
  • 0
  • 145

IPDS | Blacklists

The Intrusion Prevention and Detection System or IPDS module offers a set of enhanced security tools to protect your applications...
  • 0
  • 162

IPDS | Blacklists | Create

Create Blacklist Creating a customized blacklist will configure a set of IP addresses and subnets that are specific to your...
  • 0
  • 123

IPDS | Blacklists | Update

This section shows all the settings available for the current blacklist organized in two tabs, Global and Farms. Keep in...
  • 0
  • 137

IPDS | DoS

The DoS or Denial of Service section within the IPDS module permits to configure and set protection rules at System...
  • 0
  • 107

IPDS | DoS | Create

Creating customized DoS rules prevent attacks to certain farm services. To create a new DoS rule select Actions >> Create...
  • 0
  • 82

IPDS | DoS | Update

This section shows the DoS protection rules configuration organized in two tabs, i.e. the Global and the Farms tabs. Beware...
  • 0
  • 61

IPDS | RBL

The IPDS or Intrusion and Prevention Detection System section within the IPDS module allows the configuration and setting of protection...
  • 0
  • 118

IPDS | RBL | Rules Create

Create RBL rule In this section, you'll learn how to create a new IPDS RBL rule. Compose a new custom...
  • 0
  • 72

IPDS | RBL | Rules Update

Global Settings for RBL rules The configurable options of every RBL rule are described below. Name. The descriptive name of...
  • 0
  • 85

IPDS | RBL | Domains

RBL Domains These domains point to servers that maintain a list of bad reputation IP addresses. A server's IP address...
  • 0
  • 100

IPDS | WAF

ZEVENET Web Application Firewall The Web Application Firewall (WAF) is the tool used to detect and block malicious HTTP traffic...
  • 0
  • 143

IPDS | WAF | Create

WAF Rulesets List This section shows how to create a new set of WAF rules. A ruleset is a group...
  • 0
  • 96

IPDS | WAF | Update

This section shows all the settings available for the current WAF rule set organized in three tabs, Global, Rules, and...
  • 0
  • 167

IPDS | WAF | Files

IPDS WAF files The WAF rulesets can be used with additional files to extend the rules and order them for...
  • 0
  • 72

IPDS | WAF | Files | Create

Create IPDS WAF File The files for internal use in the WAF module are created in this section. Those files...
  • 0
  • 76

IPDS | WAF | Files | Update

Edit WAF file In this section, you'll learn how to update files in the WAF module. These files may be...
  • 0
  • 85

Monitoring | Graphs

This section connects all the Systems, Network Interfaces, Farm Services, and Monitoring Graphs. You will need this when you want...
  • 0
  • 96

Monitoring | Stats

This section shows detailed information about the statistics related to the performance, behavior, and interfaces that are present on the...
  • 0
  • 88

Monitoring | Farms Stats

Monitoring Farms Stats This section shows every detail about farms and load balancing services statistics. It shows a table with...
  • 0
  • 77

Monitoring | System Stats

Monitoring System Stats This section shows statistics about the most crucial resources available in the load balancer. It also presents...
  • 0
  • 115

Monitoring | Network Stats

Monitoring Network Stats In this section, you'll learn about the necessary stats for tracking inbound and outbound traffic passing through...
  • 0
  • 69

Monitoring | Farmguardians

The Farmguardian section lists all the available health checks in the load balancer. It also includes a short description of...
  • 0
  • 120

Network | NIC

This section describes how to configure and operate non-virtual Network Interface Cards. NIC Interfaces Table This table lists all the...
  • 0
  • 81

Network | NIC | Update

In this section, you'll learn how to change the configuration settings of a NIC. Global Networking NIC Settings The following...
  • 0
  • 62

Network | Bonding

Bonding interfaces (also known as link bundling, port trunking, channel bonding, link aggregation, NIC teaming, etc) allow the connection of...
  • 0
  • 74

Network | Bonding | Create

This section explains how to create a bonding interface and the available options. Create Bonding The detailed options to create...
  • 0
  • 64

Network | Bonding | Update

This section describes how to update and modify a Bonding interface. There are two sections of the panel: Global Settings...
  • 0
  • 64

Network | VLAN

VLAN interfaces (VLAN tagging) permit isolating logical network architectures at OSI layer 2 over the same physical NIC interface, each...
  • 0
  • 76

Network | VLAN | Create

This section explains how to create a VLAN interface and the different options available. Create VLAN Find the detailed descriptions...
  • 0
  • 63

Network | VLAN | Update

This section describes how to update and modify a VLAN interface. VLAN Global Settings You may configure the following attributes...
  • 0
  • 62

Network | Virtual Interface

Virtual Interfaces allow the assignment of more than one IP address per each NIC, Bonding, and VLAN interface configured in...
  • 0
  • 88

Network | Floating IPs

Floating IPs (FIPs) and How they can save your business. A floating IP is a type of virtual IP address...
  • 0
  • 53

Network | Floating IPs | Configure

This section describes how to configure a Floating IP of a given interface. The load balancer forwards outgoing traffic through...
  • 0
  • 70

Network | Gateway

In this section, users will learn how to configure a Default Gateway for IPv4 and IPv6 in the global routing...
  • 0
  • 85

Network | Gateway | Configure

This section describes how to update or modify the Default Gateway. Configure Gateway Settings The figure below shows a form...
  • 0
  • 75

Network | Aliases

Aliases provide a user-friendly management for the backends and the networking IP addresses to improve usability. These also create an...
  • 0
  • 90

Network | Routing | Rules

ZEVENET Load Balancer is designed to be integrated into as many subnets as possible. The system has been designed with...
  • 0
  • 98

Network | Routing | Tables

Routing Tables List Once the packet reaches the rule table, a decision is made and this part of the system...
  • 0
  • 62

Network | VPN

This section briefly describes the VPN network embedded on ZEVENET Load Balancer. The virtual private network allows flexible and scalable...
  • 0
  • 142

Network | VPN | Create

Create VPN In this section, you'll learn how to set up a VPN using ZEVENET appliance, and how to configure...
  • 0
  • 164

System | RBAC | Settings

Role Based Access Control Settings ZEVENET Load Balancer includes a Role-based access control(RBAC) module. RBAC is a policy-neutral access-control mechanism...
  • 0
  • 126

System | RBAC | Users

RBAC User List RBAC Users allows a permission-based management of the system. A user can have two types of permissions:...
  • 0
  • 97

System | RBAC | Users | Update

RBAC Users Update Learn more about configuring user-scoped parameters in this section, i.e. to give or remove permissions. Use the...
  • 0
  • 77

System | RBAC | Groups

RBAC Groups This RBAC Groups section allows the management of resource-based groups. A group is a collection of users with...
  • 0
  • 70

System | RBAC | Groups | Update

This section is about configuring groups, adding users and resources, and learning how to remove them. The update section is...
  • 0
  • 85

System | RBAC | Roles

RBAC Roles List RBAC Roles allows the management of roles based on objects and actions. A role defines a set...
  • 0
  • 97

System | RBAC | Roles | Update

RBAC Role Update In this section, you will be able to configure various parameters for the roles and enable/disable permissions...
  • 0
  • 87

System | Local Services

Local Services The Local Services section manages some load balancer services like HTTP, web GUI services, SSH for maintenance, clustering...
  • 0
  • 98

System | Remote Services

Remote Services The Remote Services section manages some external services needed by the load balancer like the DNS for resolving...
  • 0
  • 75

System | Cluster

This section allows you to manage the clustering service. The clustering service provides high availability for load balancing services through...
  • 0
  • 103

System | Backups

This section allows users to manage the configuration of backups of the load balancer for quick disaster recovery, and clone...
  • 0
  • 66

System | Backups | Create

This section allows the creation of a backup file with the whole configuration of the load balancer. Create Backup After...
  • 0
  • 57

System | Backups | Upload

This section allows uploading and storing a local backup file into the load balancer. Upload Backup The page allows you...
  • 0
  • 206

System | Notifications

This section describes how Notifications work by alerting and sending emails in case an unexpected event is detected in the...
  • 0
  • 102

System | Logs

Log List This section allows you to access the system and load balancer logs to analyze problems and gather further...
  • 0
  • 103

System | Logs | Show

Log Show When you click in the Show action, a new screen is shown as follows: In this view, you...
  • 0
  • 83

System | User

System Users This section allows users that have logged into the load balancer to change access credentials. Here is a...
  • 0
  • 64

System | Activation Certificate

ZEVENET Activation Certificate This section shows the details of the Activation Certificate of ZEVENET Enterprise Edition. In the first section,...
  • 0
  • 108

System | License

ZEVENET License This section shows the software license of ZEVENET which is based on the GNU Affero General Public License...
  • 0
  • 108

System | Support Save

ZEVENET Support Save The SupportSave section allows a user to generate a tarball gzip compressed file with all the useful...
  • 0
  • 114

System | Factory Reset

Factory Reset The Factory reset section allows a user to roll the load balancer back to a clean slate. Use...
  • 0
  • 81