Login

Login

Welcome to Zevenet 5.2! Access to the Zevenet web GUI If you've successfully installed or deployed Zevenet 5.2, you will...
  • 0
  • 6525

Dashboard

This section shows the current whole status of a Zevenet load balancer appliance: CPU usage, memory, load, connections, system information,...
  • 0
  • 7200

Dashboard | News

This section includes the latest news and main links about Zevenet. Share on:
  • -1
  • 6021

LSLB | Farms

The Local Service Load Balancing module or LSLB module is able to manage TCP, UDP or HTTP[S] protocol, improves application...
  • -1
  • 7094

LSLB | Farms | Create Farm

Under this section you will be able to create LSLB farms, these farms can be configured in two different profiles:...
  • 0
  • 7106

LSLB | Farms | Update

Update HTTP and L4xNAT profiles This section will allow configuring different options of LSLB farms, each farm profile includes different...
  • -1
  • 7494

LSLB | SSL Certificates

This section lists the secure certificates installed in the load balancer in order to be used in LSLB farms with...
  • 0
  • 6509

LSLB | SSL Certificates | Info

In the section SSL Certificates, clicking on the Common Name of a certificate will show all the details about the...
  • 0
  • 6407

LSLB | Stats

This section shows a table including the number of established and pending connections found for every LSLB farm. The number...
  • 0
  • 6638

LSLB | Stats | Graphs

This section shows the monitoring graphs history of established and pending connections of the current farm in four different periods...
  • 0
  • 6804

LSLB | Stats | Backends

This section shows two tables, a table with established and pending connections per backend, and another table with the established...
  • 0
  • 6611

GSLB | Farms

The Global Service Load Balancing, commonly called GSLB, allows creating a load balancing service based on the DNS service hierarchical...
  • 1
  • 8586

GSLB | Farms | Create

Under this section, you will be able to create GSLB farms. Create Farm GSLB After selecting Create Farm from the...
  • 0
  • 6646

GSLB | Farms | Update

This section shows all the settings available for the current GSLB farm categorized into three tabs: Global, Services, and Zones....
  • 0
  • 6681

GSLB | Stats

This section shows a table including the number of established and pending connections found for every GSLB farm. The number...
  • 0
  • 6161

GSLB | Stats | Graphs

This section shows the monitoring graphs history of established and pending connections of the current farm in four different periods...
  • 0
  • 5993

GSLB | Stats | Backends

This section shows a detailed status of the GSLB Services, Client requests and Backend stats. The Services table shows the...
  • 0
  • 6135

DSLB | Farms

The Datalink Service Load Balancing or DSLB, also known as Uplinks Load Balancing, allows to create high available and WAN...
  • 0
  • 6225

DSLB | Farms | Create

Under this section you will be able to create DSLB farms. Create Farm DSLB After selecting Create Farm from the...
  • 0
  • 6697

DSLB | Farms | Update

Global Settings for DSLB Farms The only global settings to configure a DSLB farm are described below. Name. It’s the...
  • 0
  • 7250

IPDS | Blacklists

The Intrusion Prevention and Detection System or IPDS module offers a set of enhanced security tools to protect your applications...
  • 0
  • 8357

IPDS | Blacklists | Create

Creating customized blacklists permits to configure a set of IP addresses and subnets that are specific to your infrastructure and...
  • 0
  • 6913

IPDS | Blacklists | Update

This section shows all the settings available for the current blacklist organized in two tabs Global and Farms. Keep in...
  • 0
  • 6379

IPDS | DoS

The DoS or Denial of Service section within the IPDS module permits to configure and set protection rules at System...
  • 0
  • 6876

IPDS | DoS | Create

Creating customized DoS rules prevent attacks to certain farm services. To create a new DoS rule select Actions >> Create...
  • 0
  • 6291

IPDS | DoS | Update

This section shows the DoS protection rules available organized in two tabs Global and Farms. Keep in mind that every...
  • 0
  • 6770

IPDS | RBL

The IPDS or Intrusion and Prevention Detection System section within the IPDS module permits to configure and set protection rules...
  • 0
  • 6650

IPDS | RBL | Create Rule

This section shows how to add a new IPDS RBL Rule. Introduce a custom name for your rule. Then choose...
  • 0
  • 7538

IPDS | RBL | Update

Global Settings for RBL rules The configurable options of every RBL rule are described below. Name. The name of the...
  • 0
  • 6263

IPDS | RBL | Domains

RBL Domains Those domains are Internet servers with the purpose of maintaining a list of bad reputation IP addresses. A...
  • 0
  • 7825

Monitoring | Graphs

This section joins all the System, Network Interfaces and Farms Services monitoring graphs. Useful in order to have a detailed...
  • 0
  • 7070

Monitoring | Farms Stats

This section details all farms and load balancing services statistics configured. It shows a table with the number of current...
  • 0
  • 7849

Monitoring | System Stats

This section details the most important system resources statistics available in the load balancer. It shows graphs and stats for...
  • 0
  • 7136

Monitoring | Network Stats

This section details the inbound and outbound data traffic that has been passing through all the network interfaces available in...
  • 3
  • 7594

Monitoring | Farm Guardian

The Farmguardian section lists all the available health checks in the load balancer, a short description of every one and...
  • -1
  • 9847

Network | Alias

The aliases provides a user friendly management for backends and networking IP addresses in order to improve usability and easier...
  • 0
  • 8181

Network | NIC

This section describes how to configure and operate with physical network NICs. NIC Interfaces Table This table lists all the...
  • 1
  • 6737

Network | NIC | Update

This section is used to change a physical network NIC configuration. Global Settings The global settings to change a certain...
  • 0
  • 6595

Network | Bonding

Bonding interfaces (also known as link bundling, port trunking, channel bonding, link aggregation, NIC teaming among others) permits to join...
  • 0
  • 6622

Network | Bonding | Create

This section explains how to create a bonding interface and the different options available. Create Bonding Find below the detailed...
  • 0
  • 6911

Network | Bonding | Update

This section describes how to update and modify a Bonding interface. There are two main panels: Configure Slaves to select...
  • 0
  • 6098

Network | VLAN

VLAN interfaces (also known as VLAN tagging) permits to isolate logical networks architectures at OSI layer 2 over the same...
  • 0
  • 6777

Network | VLAN | Create

This section explains how to create a bonding interface and the different options available. Create VLAN Find below the detailed...
  • 0
  • 6681

Network | VLAN | Update

This section describes how to update and modify a VLAN interface. Global Settings In this section you can configure the...
  • 0
  • 6630

Network | Virtual Interface

Virtual Interfaces permits to assign more than one IP address per each NIC, Bonding or VLAN interface configured in the...
  • 0
  • 7017

Network | Floating IPs

Floating IPs uses IP addresses from Virtual Interfaces to masquerade the outbound traffic despite they're over a NIC, VLAN or...
  • 0
  • 6939

Network | Floating IPs | Configure

This section describes how to configure Floating IPs. Global Settings In this section you can configure the following attributes on...
  • -1
  • 7025

Network | Gateway

This section allows to configure a Default Gateway for IPv4 and another for IPv6 in the global route table within...
  • 0
  • 6834

Network | Gateway | Configure

This section describes how to update and modify the Default Gateway. Global Settings In this section you can configure the...
  • 0
  • 6466

System | RBAC | Users

RBAC Users allows the management of system users based on permissions. A user can have two types of permissions: ZAPI...
  • 1
  • 9991

System | RBAC | Users | Update

From this section you can configure the user, give or remove permissions. The parameters for RBAC users are the following:...
  • 0
  • 8161

System | RBAC | Groups

RBAC Groups allows the management of groups based on resources. A group is a set of users with a role....
  • 0
  • 6478

System | RBAC | Roles

RBAC Roles allows the management of roles based on objects and actions. A role defines a set of permissions that...
  • 0
  • 8462

System | RBAC | Roles | Update

From this section you can configure the role, enable or disable permissions of object actions. In this section you can...
  • 0
  • 7710

System | Local Services

The Local Services section manages some local services of the load balancer system like HTTP web GUI service, SSH for...
  • 0
  • 5922

System | Remote Services

The Remote Services section manages some external services that requires the load balancer system like DNS to in order to...
  • 0
  • 5742

System | Backups

This section allows to manage configuration backups of the load balancer for quick disaster recovery, transplant or migrate the configuration...
  • 0
  • 6219

System | Backups | Create

This section allows to create backup files with the whole configuration of the load balancer. Create Backup After selecting Create...
  • 0
  • 5825

System | Backups | Upload

This section allows to upload and store a local backup file into the load balancer. Upload Backup The page allows...
  • 0
  • 6338

System | Cluster

This section allows to manage the clustering service that provides a high availability for the load balancing services through two...
  • 0
  • 7631

System | Cluster | Configure

This section explains how to configure the Global Settings of the cluster service in the local node. Cluster Global Settings...
  • 0
  • 6542

System | Notifications

This section describes how the Notifications section works in order to provide notifications and send emails if some events are...
  • 0
  • 5610

System | Notifications | Email

This section configures the mail server and users for sending the email notifications. Email Notifications The options to configure this...
  • 0
  • 6576

System | Users

This section allows to change the different settings for logged user in the load balancer. User. Name of the user...
  • 0
  • 6593

System | Logs

Log List This sections allows to access to the system and load balancer logs for analysis of problems and to...
  • -1
  • 5870

System | Activation Certificate

This section shows the details of the Activation Certificate for Zevenet Enterprise Edition. In the first section you can see...
  • 0
  • 5961

System | License

This section shows the software license of Zevenet which is based on the GNU Affero General Public License version 3....
  • 0
  • 6278

System | Support Save

The Support Save section allows to generate a tarball gzip compressed file with all the required information of the local...
  • 0
  • 6171