Login

Login

Welcome to Zevenet 6.0! Access to the Zevenet web GUI If you've successfully installed or deployed Zevenet 6.0, you will...
  • 0
  • 6327

Dashboard

This section shows the current whole status of a Zevenet load balancer appliance: CPU usage, memory, load, connections, system information,...
  • 0
  • 6793

Dashboard | News

This section includes the latest news and main links to Zevenet. Share on:
  • 0
  • 5361

LSLB | Farms

The Local Service Load Balancing module or LSLB module is able to manage TCP, UDP, SIP, FTP, TFTP, SCTP or...
  • 0
  • 6778

LSLB | Farms | Create Farm

Under this section you will be able to create LSLB farms, these farms can be configured in two different profiles:...
  • 0
  • 7519

LSLB | Farms | Update

Update HTTP and L4xNAT profiles This section will allow configuring different options of LSLB farms, each farm profile includes different...
  • 0
  • 6930

LSLB | SSL Certificates

This section lists all the certificates installed in the load balancer in order to be used in LSLB farms with...
  • 0
  • 6819

LSLB | SSL Certificates | Info

In the section SSL Certificates, clicking on the Common Name of a certificate will show all the details about the...
  • 0
  • 6193

LSLB | Stats

This section shows a table including the number of established and pending connections found for every LSLB farm. The number...
  • 0
  • 5742

LSLB | Stats | Graphs

This section shows the monitoring graphs history of established and pending connections of the current farm in four different periods...
  • 0
  • 5723

LSLB | Stats | Backends

This section shows two tables, a table with established and pending connections per backend (Backends table), and another table with...
  • 0
  • 6045

GSLB | Farms

The Global Service Load Balancing, commonly called GSLB, allows creating a load balancing service based on the DNS service hierarchical...
  • 0
  • 6233

GSLB | Farms | Create

Under this section, you will be able to create GSLB farms. Create Farm GSLB After selecting Create Farm from the...
  • 0
  • 5913

GSLB | Farms | Update

This section shows all the settings available for the current GSLB farm categorized into four tabs: Global, Services, Zones, and...
  • 0
  • 6363

GSLB | Stats

This section shows a table including the number of established and pending connections found for every GSLB farm. The number...
  • 0
  • 5908

GSLB | Stats | Graphs

This section shows the monitoring graphs history of established and pending connections of the current farm in four different periods...
  • 0
  • 5383

GSLB | Stats | Backends

This section shows a detailed status of the GSLB Services, Client requests, and Backend stats. The Services table shows the...
  • 0
  • 5906

DSLB | Farms

The Datalink Service Load Balancing or DSLB, also known as Uplinks Load Balancing, allows to create highly available and WAN...
  • 0
  • 6023

DSLB | Farms | Create

Under this section, you will be able to create DSLB farms. Create Farm DSLB To create a DSLB farm go...
  • 0
  • 6608

DSLB | Farms | Update

Global Settings for DSLB Farms The global settings able to be configured in a DSLB farm are described below. Name....
  • 0
  • 6071

IPDS | Settings

This section describes how to install or schedule updates for the IPDS package. IPDS Package Updates The IPDS package contains...
  • 0
  • 6987

IPDS | Blacklists

The Intrusion Prevention and Detection System or IPDS module offers a set of enhanced security tools to protect your applications...
  • 0
  • 7607

IPDS | Blacklists | Create

Creating customized blacklists permits to configure a set of IP addresses and subnets that are specific to your infrastructure and...
  • 0
  • 6153

IPDS | Blacklists | Update

This section shows all the settings available for the current blacklist organized in two tabs, Global and Farms. Keep in...
  • 0
  • 6461

IPDS | DoS

The DoS or Denial of Service section within the IPDS module permits to configure and set protection rules at System...
  • 0
  • 6868

IPDS | DoS | Create

Creating customized DoS rules prevent attacks to certain farm services. To create a new DoS rule select Actions >> Create...
  • 0
  • 6101

IPDS | DoS | Update

This section shows the DoS protection rules configuration organized in two tabs Global and Farms. Keep in mind that every...
  • 0
  • 5895

IPDS | RBL

The IPDS or Intrusion and Prevention Detection System section within the IPDS module permits to configure and set protection rules...
  • 0
  • 7189

IPDS | RBL | Create Rule

This section shows how to add a new IPDS RBL Rule. Introduce a custom name for your rule. Then choose...
  • 0
  • 6207

IPDS | RBL | Update

Global Settings for RBL rules The configurable options of every RBL rule are described below. Name. The descriptive name of...
  • 0
  • 6451

IPDS | RBL | Domains

RBL Domains Those domains are Internet servers with the purpose of maintaining a list of bad reputation IP addresses. A...
  • 0
  • 6853

IPDS | WAF

The Web Application Firewall, WAF, is the tool to detect and to block malicious HTTP traffic that is going across...
  • 0
  • 7956

IPDS | WAF | Create

This section shows how to create a new set of WAF rules. A rule set is a group of WAF...
  • 1
  • 7607

IPDS | WAF | Update

This section shows all the settings available for the current WAF rule set organized in three tabs, Global, Rules, and...
  • 0
  • 9534

Monitoring | Graphs

This section joins all the System, Network Interfaces and Farms Services monitoring graphs. It is useful in order to have...
  • 0
  • 6251

Monitoring | Stats

This section shows detailed information about the statistics related to the performance, behavior, and interfaces that are present on the...
  • 0
  • 7413

Monitoring | Farms Stats

This section details all farms and load balancing services statistics configured. It shows a table with the number of current...
  • -1
  • 6682

Monitoring | System Stats

This section details the most important system resources statistics is available in the load balancer. It shows graphs and stats...
  • 0
  • 6697

Monitoring | Network Stats

This section details the inbound and outbound data traffic that has been passing through all the network interfaces available in...
  • -1
  • 5983

Monitoring | Farmguardians

The Farmguardian section lists all the available health checks in the load balancer, a short description of each one and...
  • 0
  • 7167

Network | Aliases

Aliases provide user-friendly management for backends and networking IP addresses in order to improve usability and easier operation. By creating...
  • -1
  • 7701

Network | NIC

This section describes how to configure and operate with physical network NICs. NIC Interfaces Table This table lists all the...
  • 0
  • 6418

Network | NIC | Update

This section is used to change a physical network NIC configuration. Global Settings The global settings to change a certain...
  • 0
  • 6740

Network | Bonding

Bonding interfaces (also known as link bundling, port trunking, channel bonding, link aggregation, NIC teaming among others) permits to join...
  • 0
  • 6582

Network | Bonding | Create

This section explains how to create a bonding interface and the different options available. Create Bonding Find below the detailed...
  • 0
  • 5923

Network | Bonding | Update

This section describes how to update and modify a Bonding interface. There are two sections of the panel: Global Settings...
  • 0
  • 6340

Network | VLAN

VLAN interfaces (also known as VLAN tagging) permits to isolate logical networks architectures at OSI layer 2 over the same...
  • 0
  • 6103

Network | VLAN | Create

This section explains how to create a VLAN interface and the different options available. Create VLAN Find below the detailed...
  • 0
  • 6169

Network | VLAN | Update

This section describes how to update and modify a VLAN interface. Global Settings In this section you can configure the...
  • 0
  • 5862

Network | Virtual Interface

Virtual Interfaces permits to assign more than one IP address per each NIC, Bonding or VLAN interface configured in the...
  • 0
  • 6337

Network | Floating IPs

Floating IPs uses IP addresses from Virtual Interfaces to masquerade the outbound traffic despite they're going over a NIC, VLAN...
  • 0
  • 6900

Network | Floating IPs | Configure

This section describes how to configure a Floating IP for an interface. The load balancer masquerades the forwarded traffic outgoing...
  • 0
  • 6584

Network | Gateway

This section allows you to configure a Default Gateway for IPv4 and other for IPv6 in the global routing table...
  • 0
  • 6560

Network | Gateway | Configure

This section describes how to update or modify the Default Gateway. Global Settings In this section you can configure the...
  • 0
  • 6035

System | RBAC | Users

RBAC Users allows the management of system users based on permissions. A user can have two types of permissions: ZAPI...
  • 0
  • 6579

System | RBAC | Users | Update

This section allows you to configure user-scoped parameters, i.e. to give or remove permissions. The parameters for RBAC users are...
  • 0
  • 6218

System | RBAC | Groups

RBAC Groups allows the management of resources based groups. A group is a set of users with the same role....
  • 0
  • 6288

System | RBAC | Roles

RBAC Roles allows the management of roles based on objects and actions. A role defines a set of permissions that...
  • 0
  • 6501

System | RBAC | Roles | Update

In this section, you can configure different parameters for the role and enable or disable permissions of actions over objects....
  • 0
  • 6022

System | Local Services

The Local Services section manages some load balancer local services like HTTP web GUI service, SSH for maintenance and clustering...
  • 0
  • 6152

System | Remote Services

The Remote Services section manages some external services needed for the load balancer system like DNS to in order to...
  • 1
  • 5799

System | Backups

This section allows to manage configuration backups of the load balancer for quick disaster recovery, clone or migrate the configuration...
  • 0
  • 5518

System | Backups | Create

This section allows creating a backup file with the whole configuration of the load balancer. Create Backup After selecting Create...
  • 0
  • 5323

System | Backups | Upload

This section allows uploading and storing a local backup file into the load balancer. Upload Backup The page allows you...
  • 0
  • 5488

System | Cluster

This section allows you to manage the clustering service. The clustering service provides high availability for load balancing services through...
  • -1
  • 6729

System | Factory Reset

Factory Reset This section allows the load balancer to roll back to a clean state, use this feature with caution...
  • 0
  • 7413

System | Notifications

This section describes how the Notifications section works in order to provide notifications and send emails in the case that...
  • 0
  • 5168

System | User

This section allows you to change different settings for the logged user in the load balancer. User. Descriptive user name,...
  • 0
  • 5770

System | Logs

Log List This section allows you to access the system and load balancer logs to analyze problems and to gather...
  • 0
  • 6611

System | Logs | View

Log View When you click in the View action a new screen is shown as follows: In this view, you...
  • -1
  • 6891

System | Activation Certificate

This section shows the details of the Activation Certificate for Zevenet Enterprise Edition. In the first section, you can see...
  • 0
  • 5319

System | License

This section shows the software license of Zevenet which is based on the GNU Affero General Public License version 3....
  • 0
  • 5845

System | Support Save

The Support Save section allows to generate a tarball gzip compressed file with all the useful information of the local...
  • 0
  • 5268