Login

Login

Welcome to Zevenet 5! Access to the Zevenet web GUI If you've successfully installed or deployed Zevenet 5, you'll be...
  • 1
  • 2493

Dashboard

This section shows the current whole status of a Zevenet load balancer appliance: CPU usage, memory, load, connections, system information,...
  • 0
  • 1611

Dashboard | News

This section includes the latest news and main links about Zevenet. Share on:
  • 0
  • 870

LSLB | Farms

Under this section you’ll be able to manage the LSLB (Local Service Load Balancing, mainly TCP/UDP/SCTP/HTTP/HTTPS based apps) farms module....
  • 0
  • 2026

LSLB | Farms | Create Farm

Under this section you will be able to create LSLB farms, these farms can be configured in two different profiles:...
  • 0
  • 1737

LSLB | Farms | Update

This section will allow to configure different options of LSLB farms, each farm profile includes different parameters because each one...
  • 0
  • 1606

LSLB | SSL Certificates

This section lists the secure certificates installed in the load balancer in order to be used in LSLB farms with...
  • 0
  • 1205

LSLB | SSL Certificates | Upload

In the section SSL Certificates included in LSLB is the action Upload Certificate. This leads to a form to upload a...
  • -1
  • 1033

LSLB | SSL Certificates | Info

In the section SSL Certificates, clicking on the Common Name of a certificate will show all the details about the...
  • 0
  • 1055

LSLB | Stats

This section shows a table including the number of established and pending connections found for every LSLB farm. The number of...
  • 0
  • 1054

LSLB | Stats | Graphs

This section shows the monitoring graphs history of established and pending connections of the current farm in four different periods...
  • 0
  • 944

LSLB | Stats | Backends

This section shows a table of established and pending connections per backend. Also if the farm is an instance of...
  • 0
  • 943

GSLB | Farms

The Global Service Load Balancing, commonly called GSLB, allows to create a load balancing service based on the DNS service...
  • 0
  • 1134

GSLB | Farms | Create

Under this section you will be able to create GSLB farms. Create Farm GSLB After selecting Create Farm from the...
  • 0
  • 1047

GSLB | Farms | Update

This section shows all the settings available for the current GSLB farm categorized in three tabs: Global, Services and Zones....
  • 0
  • 1331

GSLB | Stats

This section shows a table including the number of established and pending connections found for every GSLB farm. The number of...
  • 0
  • 854

GSLB | Stats | Graphs

This section shows the monitoring graphs history of established and pending connections of the current farm in four different periods...
  • 0
  • 811

GSLB | Stats | Backends

This section shows a detailed status of the GSLB Services, Client requests and Backend stats. The Services table shows the...
  • 0
  • 939

DSLB | Farms

The Datalink Service Load Balancing or DSLB, also known as Uplinks Load Balancing, allows to create high available and WAN...
  • 2
  • 2139

DSLB | Farms | Create

Under this section you will be able to create DSLB farms. Create Farm DSLB After selecting Create Farm from the...
  • 0
  • 951

DSLB | Farms | Update

Global Settings for DSLB Farms The only global settings to configure a DSLB farm are described below. Name. It’s the...
  • 0
  • 949

IPDS | Blacklists

The Intrusion Prevention and Detection System or IPDS module offers a set of enhanced security tools to protect your applications...
  • 0
  • 955

IPDS | Blacklists | Create

Creating customized blacklists permits to configure a set of IP addresses and subnets that are specific to your infrastructure and...
  • 0
  • 918

IPDS | Blacklists | Update

This section shows all the settings available for the current blacklist organized in two tabs Global and Farms. Keep in...
  • 0
  • 962

IPDS | DoS

The DoS or Denial of Service section within the IPDS module permits to configure and set protection rules at System...
  • 1
  • 890

IPDS | DoS | Create

Creating customized DoS rules prevent attacks to certain farm services. To create a new DoS rule select Actions >> Create...
  • 0
  • 1007

IPDS | DoS | Update

This section shows the DoS protection rules available organized in two tabs Global and Farms. Keep in mind that every...
  • 1
  • 1541

Monitoring | Graphs

This section joins all the System, Network Interfaces and Farms Services monitoring graphs. Useful in order to have a detailed...
  • 0
  • 860

Monitoring | Farms Stats

This section details all farms and load balancing services statistics configured. It shows a table with the number of current...
  • 0
  • 735

Monitoring | System Stats

This section details the most important system resources statistics available in the load balancer. It shows graphs and stats for...
  • 0
  • 675

Monitoring | Network Stats

This section details the inbound and outbound data traffic that has been passing through all the network interfaces available in...
  • 0
  • 953

Network | NIC

This section describes how to configure and operate with physical network NICs. NIC Interfaces Table This table lists all the...
  • 0
  • 1016

Network | NIC | Update

This section is used to change a physical network NIC configuration. Global Settings The global settings to change a certain...
  • 0
  • 856

Network | Bonding

Bonding interfaces (also known as link bundling, port trunking, channel bonding, link aggregation, NIC teaming among others) permits to join...
  • 0
  • 998

Network | Bonding | Create

This section explains how to create a bonding interface and the different options available. Create Bonding Find below the detailed...
  • 0
  • 787

Network | Bonding | Update

This section describes how to update and modify a Bonding interface. There are two main panels: Configure Slaves to select...
  • 0
  • 859

Network | VLAN

VLAN interfaces (also known as VLAN tagging) permits to isolate logical networks architectures at OSI layer 2 over the same...
  • 0
  • 969

Network | VLAN | Create

This section explains how to create a bonding interface and the different options available. Create VLAN Find below the detailed...
  • 0
  • 880

Network | VLAN | Update

This section describes how to update and modify a VLAN interface. Global Settings In this section you can configure the...
  • 0
  • 984

Network | Virtual Interface

Virtual Interfaces permits to assign more than one IP address per each NIC, Bonding or VLAN interface configured in the...
  • 0
  • 957

Network | Floating IPs

Floating IPs uses IP addresses from Virtual Interfaces to masquerade the outbound traffic despite they're over a NIC, VLAN or...
  • -1
  • 1350

Network | Floating IPs | Configure

This section describes how to configure Floating IPs. Global Settings In this section you can configure the following attributes on...
  • 0
  • 1114

Network | Gateway

This section allows to configure the Default Gateway of the global route table within the load balancer. Despite every NIC,...
  • 0
  • 1074

Network | Gateway | Configure

This section describes how to update and modify the Default Gateway. Global Settings In this section you can configure the...
  • 0
  • 1055

System | Local Services

The Local Services section manages some local services of the load balancer system like HTTP web GUI service, SSH for...
  • 0
  • 1566

System | Remote Services

The Remote Services section manages some external services that requires the load balancer system like DNS to in order to...
  • 0
  • 1332

System | Backups

This section allows to manage configuration backups of the load balancer for quick disaster recovery, transplant or migrate the configuration...
  • 0
  • 834

System | Backups | Create

This section allows to create backup files with the whole configuration of the load balancer. Create Backup After selecting Create...
  • 0
  • 605

System | Backups | Upload

This section allows to upload and store a local backup file into the load balancer. Upload Backup The page allows...
  • 0
  • 870

System | Cluster

This section allows to manage the clustering service that provides a high availability for the load balancing services through two...
  • 0
  • 1334

System | Cluster | Configure

This section explains how to configure the Global Settings of the cluster service in the local node. Cluster Global Settings...
  • 0
  • 1017

System | Notifications

This section describes how the Notifications section works in order to provide notifications and send emails if some events are...
  • 0
  • 859

System | Notifications | Email

This section configures the mail server and users for sending the email notifications. Email Notifications The options to configure this...
  • 0
  • 948

System | Users

This section shows the users that are managed by the load balancer. Currently, only root system user in order to...
  • 0
  • 1166

System | Users | Configure

This section allows to change the different settings for every user defined in the load balancer. Two main roles are...
  • 0
  • 799

System | Logs

This sections allows to access to the system and load balancer logs for analysis of problems and to gather further...
  • 1
  • 836

System | Activation Certificate

This section shows the details of the activated certificate for Zevenet Enterprise Edition. The Validity section indicates: Not Before. Date...
  • 0
  • 1055

System | License

This section shows the software license of Zevenet which is based on the GNU Affero General Public License version 3....
  • 0
  • 890

System | Support Save

The Support Save section allows to generate a tarball gzip compressed file with all the required information of the local...
  • 0
  • 698