Network | VLAN | Create

POSTED ON 7 April, 2017

This section explains how to create a bonding interface and the different options available.

Create VLAN

Find below the detailed options to create a VLAN.

zevenet network vlan create

Parent Interface. Set a NIC or Bonding interface as parent where the VLAN will be configured.
Name. Set a name to identify the new VLAN, the name starts with the name of the Parent Interface followed by the VLAN tag to be used, and they are separated with a dot.
Address. Set an IPv4 address for the new VLAN.
Netmask. Set a network mask for the new VLAN.
Gateway. Set a default gateway for this VLAN interface.

Once all the required changes are done, press the Create button to create the new VLAN interface.

Share on:

Documentation under the terms of the GNU Free Documentation License.

Was this article helpful?

Related Articles