Network | Floating IPs

Floating IPs uses IP addresses from Virtual Interfaces to masquerade the outbound traffic despite they’re over a NIC, VLAN or Bonding interface and despite they’re in one cluster node to another. So that, when the services created over a Floating IP of the cluster could be switched from one node to another transparently without affecting to the clients or backends connections.

Floating IPs Table

This table lists all the Floating IPs configured in the system and the available parent interfaces where a Floating IP can be configured.

zevenet network floating ip

INTERFACE. Name of the parent interface, which could be a physical NIC, VLAN or bonding interface.
FLOATING IP. Virtual interface that has been defined as Floating IP between the cluster nodes.
ACTIONS. The available actions for floating IPs in the table are the following:

  • Configure. Assign the Floating IP for a certain parent interface. Only one floating interface can be configured per parent.
  • Unset. Unset the configuration and remove the floating IP.

The actions will be executed in batches in all the selected interfaces through the multiple selection option.

Share on:

Documentation under the terms of the GNU Free Documentation License.

Was this article helpful?

Related Articles