GSLB | Farms | Create

POSTED ON 2 February, 2017

Under this section you will be able to create GSLB farms.

Create Farm GSLB

After selecting Create Farm from the Actions button, a new panel to setup a new farm is shown.

zevenet gslb create farm

To create a GSLB farm go to GSLB module >> Farms section >> Actions menu, and select Create Farm. This will show a form with the minimum required configuration for a GSLB farm:

Name. The farm identification name.
Virtual IP. Assign a network interface and IP address to the new farm.
Virtual Port. Assign a dedicated port to the new farm. By default, as the GSLB is a DNS service the standard port will be 53 UDP.

Once the new farm details has been entered, then press the Create button and a confirmation message should appear.

Next step, configure the GSLB farm properties.

Share on:

Documentation under the terms of the GNU Free Documentation License.

Was this article helpful?

Related Articles