LSLB | Farms

Under this section you’ll be able to manage the LSLB (Local Service Load Balancing, mainly TCP/UDP/SCTP/HTTP/HTTPS based apps) farms module.

Actions Sub-menu Button

Through the Actions menu button the following actions are available for the selected farms:

lslb farm actions

  • Create Farm. Create a new farm managed by the LSLB module, available farm profiles are http, https or l4xnat.
  • Restart. Stop and start again a farm service in the LSLB module, available farm profiles are http, https or l4xnat.
  • Stop. This action stops the selected farms services.
  • Start. This action starts the selected farms services.
  • Delete. This action stops the services and deletes the farms configuration and history connection stats.

The actions will be executed in batches in all the selected farms (multiple selection available).

Content Table

Farms listing with the properties of every farm.

lslb http tcp lb farms listing

The fields shown per farm are described below.

NAME. Descriptive name for the farm, this value will be unique in all the virtual services created.
PROFILE. The configured profile for the given farm, available profiles for LSLB module are: http, https and l4xnat.
VIRTUAL IP. IP address that is managing the traffic, it’s also known as the virtual IP that could be moved to another node of the cluster.
VIRTUAL PORT. Port that is managing the traffic, it is also now as virtual port.
STATUS. The status for the given farm, the available values are UP (green bullet), DOWN (red bullet) or RESTART NEEDED (orange bullet). When the status is UP the farm is running and is able to manage the traffic in the configured virtual IP and PORT(s). If the status is DOWN the farm is stopped and the incoming connections rejected. If the status is RESTART NEEDED the farm has changes but still not applied, a restart is required to apply the new changes.
ACTIONS. The available actions/icons for every farm in the table are the following:

  • Edit. Change the basic and advanced options for this virtual service or farm, create new services and apply changes to the backends.
  • Restart. The Farm will be stopped and started automatically.
  • Stop. This action is only available if the farm is running and all the traffic managed by this farm will be dropped once the button is pressed. The PORT will be released so, it will be able to be used by another profile.
  • Start. This action is only available if the farm is stopped, the service will bind to the configured IP and PORT and hence the traffic through them will be handled by the farm.
  • Delete. The Farm will be stopped and all the configuration files deleted. The IP and PORT will be released so it could be used by another farm.

Next step, create a LSLB farm.

Share on:

Was this article helpful?

Related Articles